Tektronix TDS3000 Series Program Manual

Command Descriptions
2- 244
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
<NR1> is a value with a range from 0 to 15 that indicates the remaining charge in
the battery; 0 means the battery is fully discharged and 15 means the battery is
fully charged
POWER:BATTERY:GASGAUGE?
might return :POWER:BATTERY:GASGAUGE 15.
POWer:BATTERY:PRESENT?
POWer:BATTery:PRESENt? (Query Only)
Indicates if there is a battery in the instrument.
Miscellaneous
POWer:BATTery:PRESENt?
<NR1> = 0 indicates there is no battery in the instrument.
<NR1> = 1 indicates there is a battery in the instrument.
POWER:BATTERY:PRESENT?
might return :POWER:BATTERY:PRESENT 0.
POWer:AC:PRESENt?
POWer:SHUTdown
Sets or returns the idle time that must elapse before the oscilloscope is turned
off. When the oscilloscope is running on AC power, idle time is ignored.
Miscellaneous
POWer:SHUTdown { <NR1> | INFInite }
POWER:SHUTdown?
Arguments
Examples
Related Commands
Group
Syntax
Arguments
Examples
Related Commands
Group
Syntax

Tektronix TDS3000 Series Specifications

General

Brand	Tektronix
Model	TDS3000 Series
Category	Test Equipment
Language	English