Command Descriptions
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2- 245
<NR1> = the number of minutes of idle time before the oscilloscope is powered
off. 999999999 is used for infinity, but any value greater than 15 (max timeout)
will be rounded to infinity.
INFinite disables the timer meaning the oscilloscope will not power off
automatically.
POWER:SHUTDOWN 5
Instrument will power off after the oscilloscope has been idle for 5 minutes.
*PUD
Sets or returns a string of Protected User Data. This data is protected by the
PA SSWord command. You can modify it only by first entering the correct
password. The password is not necessary to query the data. This data is
displayed in the UTILITY System Config menu. This command accepts
European, Russian, and Asian characters; see the MESSAGE:SHOW command
for details. Query always returns <Block> type response.
Miscellaneous
*PUD <Block> or <Qstring>
*PUD?
<Block> is a string containing up to 300 characters.
*PUD #229This instrument belongs to me
stores the string “This instrument belongs to me” in the user protected data area.
*PUD?
might return #221Property of Company X.
PASSWord
Arguments
Examples
Group
Syntax
Arguments
Examples
Related Commands
To Next Page
Loading...
Need help?
General
