Functions
To Save Presets
The instrument
can store up to 32 separate instrument presets. The prese ts are
divided into four groups, A through D, with each group containing 8 preset storage
locations. The default preset names are A1 – A8, B1 – B8, C1 – C8, and D1 – D8.
Quickaccesstopresets1–8.
1. Set up the instrument exactly as you want to have it configured. This includes
setting the contents of each tile and the audio and video settings.
2. Press and hold one of the preset buttons (1 through 8) to which you want
to save the setup.
NOTE. Pressing and holding a preset button accesses the Group A preset locations
by default. You can use the Bezel Group Select menu in the Preset menu to change
which of
the four preset groups are associated with the front panel preset buttons.
3. In the dialog box that appears, press the right arrow key to highlight the
Contin
ue box.
4. Press the SEL button. A message displays that your preset is saved.
Access to all presets.
1. Set up the instrument exactly as you want to have it configured. This includes
sett
ing the contents of each tile and the audio and video settings.
2. Press the PRESET button to display the Preset Menu.
3. Use the arrow buttons to navigate to a preset location to save the instrument
settings. For example select Save Preset > Select Gr oup B > Save B1.
4. Press the SEL button. A message will display that your preset is sav ed.
To Recall Prese ts
Recalling presets is easy: press the PRESET buttontodisplaythePresetMenu.
Use the arrow buttons to navigate to the preset that corresponds to the p reset
you want and press the SEL button.
To recall factory presets, press the PRESET button to display the Preset Menu.
Use the arrow buttons to navigate to Recall Preset > Recall Factory Preset
and then press the SEL button.
94 WFM8200 and WFM8300 Waveform Monitors
To Next Page
Loading...
