Functions
8. Inthesamesubm
enu, navigate to the Preset Group that matches the source
Preset Group and press the SEL button.
9. Press the left
arrow key and then t he down arrow key and highlight Copy.
10. Press the SEL button. You should see a pop-up notice that says Export
Complete.
11. If you do not want to export any other p resets at this time, press the Preset
buttontodi
smiss the menu.
12. Remove the USB memory device from the USB drive.
Software Upgrades
After you have verified that your instrument must have the software upgraded,
use the f
ollowing procedures to upgrade the software.
After obtaining the latest software package, you can upgrade the instrument
either
using the USB Software Installation procedure or the Network Software
Installation procedure.
96 WFM8200 and WFM8300 Waveform Monitors
To Next Page
Loading...
