Tektronix WFM8200 - Figure 77: Safe Action and Safe Title Areas

Closed Captioning (CC), Teletext, AFD, and Safe Area Compliance
4. Select one of th
e following:
Auto to let the instrument automatically select the size and offsets of the
safe area.
4x3, 14x9,or16x9 to set the safe area size and offsets appropriate for
these aspec
t ratios based on the selected standard.
Custom_1 or Custom_2 to set the safe area size and offsets to mat ch the
custom sett
ings in the Graticules Configuration menu.
5. After setting each Safe Area selection, press the PICT button to dismiss the
pop-up men
u.
Usage Notes
The Safe Action Area shows the maximum image area within which all
significant action should be contained; the Safe Title Area shows the
maximum
image area within which all significant titles should be contained.
(See Figure 77.)
Safe Ar
ea Graticules can globally be configured to comply to accepted
standards in the Configuration menu.
Custo
m selections for vertical and horizontal size and offset of the Save Areas
can be set in the Configuration menu.
Figure 77: Safe Action and Safe Title areas
WFM8200 and WFM8300 Waveform Monitors 163