Getting Acquainted with Your Instrument
Control element or group Usage procedures
Configuration button
Use to s et para
meters, view instrument
options, upgrade software, and perform
many other tasks.
Up/Down/Left/Right Arrow keys and SEL
buttons
Use to navigate menus and select
parameters.
General kno
b
Use to navigate menus and adjust
parameters
.
Vertical and Horizontal knobs
Use to posit
ion waveforms when displayed
in tiles or full-screen. When the Audio tile is
active, use the Horizontal knob to adjust the
headphone
volume.
Power button
Press to t
urn the instrument on or off. Note
that this button does not remove power from
the mains.
Display button
Access to w a veform, graticule, LC D backlight
intensi
ty, display capture to USB, and Infinite
Persistence mode.
Main but
ton
Access to Multi-Input Display mode, SyncVu
mode, SIM m ode, and USB s tatus.
Other button Access to the LTC Display (See page 50.)
Instrument Online Help
When
you press the HELP button on the front panel of your instrument, the
instrument online help is accessed. Use the instrument online help when you
have questions about buttons, features, operations, or anything else related to
your instrument. It is:
Context-sensitive. The topic displayed depends on what is displayed in the
active tile when the o nline help is selected or what control is operated after
help is selected.
Navigable. The Contents and Topic Selector panes, w ith links within the
topics, provide access to topics. (See Figure 4 on page 13.)
To Navigate Online Help
1. Press the HELP button.
2. Press the right arrow key to navigate to the Help Contents pane.
3. Use the General knob or the up/down arrow keys to highlight an entry in
the Contents (entries n ever change).
4. Press the SEL button to select the highlighted category.
WFM8200 and WFM8300 Waveform Monitors 17
To Next Page
Loading...
