Checking Gamut
3. Select Alarms a
nd then Video C ontent. A dialog box appears where you can
select for the various Video Content alarms.
4. Use the up/dow
n arrow keys to move to each of the alarms that you want to
set. Press the SEL button to toggle the alarm on (X) or off.
5. When you hav
econfigured the Alarms as you want them, move to the Select
here box and select it.
6. Back in the A
larms menu, check that Enable Alarms is set to On before
exiting the Alarms menu.
124 WFM8200 and WFM8300 Waveform Monitors
To Next Page
Loading...
