Display Information
Dolby Source:I
ndicates the instrument input from which the Dolby Content
is sourced.
Dolby Data Rat
e: For Dolby D, indicates the encoded data rate; for Dolby E,
indicates the data rate that would be used to encode a Dolby Digital bitstream.
Dolby Sampl
eRate: Indicates the sample rate of the decoded Dolby Digital
bitstream.
Bitstream M
ode: Describes the audio service contained within the Dolby
Digital bitstream. A complete audio program may consist of a main audio
service (a complete mix of all the program audio), an associated audio service
comprising a c omplete mix, or a main service combined with an associated
service. For more information a bout possible values, see the instrument online
help; when the Dolby Status display is active in a tile, press the HELP button.
Dolby E Fr ame Rate: Indicates the Dolby E frame rate. If D olby Frame Rate
is not the same as the video Frame Rate, the rate value is displayed in red.
Dolby E Frame Loc: Displays the location (line number and sample number)
of the SMPTE337 pre-amble. Also displays the Dolby E sync words one and
two fo
r bit depths of 16, 20, and 24.
Dolby PA Alignment: Indicates a n alignment error between the left and
right
Dolby channels.
Dialog Level: Represents the long-term, A-weighted average level of dialog
with
in a presentation, LAeq.
ARIB Status
Check for the presence and status of ARIB-based information encoding. The
instrument supports TR-B.22, TR-B.23-1, TR-B.23-2, B.35, B.37, and B.39 ARIB
st
andards. To view the ARIB content displays, enable this option in CONFIG >
Aux Data Settings > ARIB Content Display. For detailed information about
ARIB displays, go to the ARIB Displays section in this manual. (See page 125.)
WFM8200 and WFM8300 Waveform Monitors 77
To Next Page
Loading...
