Teleco Flat Sat Light - Page 33

Menu and advanced functions
Vers. 001 Flat Sat Light
33
Once the name of the list has been defined, use the keys to select the properties
(Services, Coding mode, List type, Satellite) of the list being created and use the
keys to choose the following options:
Services :
- TV and Radio - the list will consist of all services, both TV and Radio.
- TV services - the list will only consist of the TV services.
- Radio Services - the list will only consist of the Radio services.
Encoding mode :
- All - the list will consist of all the services picked up by the receiver.
- Coded - the list will only consist of the services for which the Network or Broadcaster
provided for a managed coding system (Control Access): to make use of
these services you must have the suitable authorizations (generally made
available by electronic devices such as the CAM module and the SmartCard)
allowing for the received signal to be decoded.
- Free - the list will only consist of the services which can be used free.
List type :
- All Services - in the list all services are marked as ON
- None - in the list all services are marked as OFF