Telecom Behnke 5 Series Instructions

Code Parameter Conrmation
21
22
Telephone number: Default: cf. text
Telephone number
▸
telephone number 1 (button 1)
Telephone number
▸
telephone number 2 (button 2)
Telephone numbers contain cyphers only and hold a maximum of
20 digits. When entering a telephone number, you may use the
following special characters:
*0 = dial *
*1 = dial #
*2 = pause for 2 seconds
*7 1 = Activate relay
*8 x y = waiting for call answer (x = voice message played while
waiting for call to be answered and y = voice message
played after call has been answered)
**0 = Hotline function
*# = Flash function (150ms)
**** = Hang up (in case the relay is still activated, it will
remain activated until the activation interval has
elapsed, then the device will hang up)
By default, button 1 is set to dial extension 11 and button 2 is set to
dial extension 12 (cf. 3.3 default configuration in connection with
an AC14 AGFEO telephone system)
#
#
Use configuration step codes 50 to 59 to set-up the integrated voice message module. Using the
voice message module requires an additional 15V power supply.
50
Reset voice message module:
* * * *
Performing a reset will return configuration step codes 51 to 59
to their default settings. Upon connecting a voice message module
and providing an additional 15 V power supply, all recorded voice
message will be erased and the number of long voice messages
will be set to its default setting 1.
Specify the number of long voice messages: Default setting: 1
* * * Number of long voice messages
1 = 1 message (message no. 6: 40s)
2 = 2 messages (message no. 6: 20s and message no. 7: 20s)
3 = 3 messages (message no. 6: 15s; message no. 7: 15s and
message no. 8: 10s)
4 = 4 messages (message no. 6: 10s; message no. 7: 10s;
message no. 8: 10s
and message no. 9: 10s)
The voice message module will store up to 5 short voice-messages,
each a maximum of 4 seconds long. Additionally, the module
will store longer voice messages of up to 40 seconds. Via the
configuration steps 1 to 4, you may divide these 40 seconds into a
maximum of 4 long voice messages. The maximum amount of
#
#
Configuration and Set-up
52 www.behnke-online.com
GB
Instructions for Series 5 / 10

Telecom Behnke 5 Series Specifications

General

Brand	Telecom Behnke
Model	5 Series
Category	Intercom System
Language	English