Teletek electronics CA60Plus - Page 37

CA60Plus control panel Installation manual 37
Supplement B Default programming table
Default programming
PROGRAM MENU ADDRESS LED 1 LED 2 LED 3 LED 4 LED 5 LED 6
QUICK ARM ENABLE 54 NO - LED1 to LED6 do not light YES - LED1 to LED6 light
ENABLE AMBUSH CO
D
55
ENABLE KBD BLOCK 56 NO - LED1 to LED6 do not light YES - LED1 to LED6 light
TROUBLE MASK 57 AC LOST BATT LOW FUSE BLOWN NO TEL LINE COMM ERROR TAMPER
TEL No 1 60
PA NEL ID 1 61
PROTOCOL 1
62
TEL No 2 63
PA NEL ID 2 64
PROTOCOL 2
65
WA IT DIA L TONE 66 NO - LED1 to LED6 do not light Y ES - LED1 to LED6 light
TEST TIME
67
TEST PERIOD 68
69
 A LA RM PA NIC FIRE ON/OFF+BPS MEDICA L TROUBLE

A LA RM PA NIC FIRE ON/OFF+BPS MEDICA L TROUBLE
TEL No PC FOR UDL 70
PC ID FOR UDL 71
PA NEL ID FOR UDL 72
CALL BACK 73 NO - LED1 to LED6 do not light YES - LED1 to LED6 light
No OF RINGS 74
A NSW. MA CHINE 75 NO - LED1 to LED6 do not light Y ES - LED1 to LED6 light
COMM A TTEMPTS 76
VOICE DIALER PRG 80
VOICE DIALER
TEL No 1
81
VOICE DIALER
TEL No 2
82
VOICE DIALER
TEL No 3
83
VOICE DIALER
TEL No 4
84
VOICE DIALER
EV ENTS
85 0 - Allarm or Tamper by zones, ambush code
1 - Allarm, Panic, Tamper, Fire, Medical,
АС LOST, ВА ТТ LOW
WA LK TEST 90 ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6
LED TEST 91
OUTPUTS TES T 9 2 PGM1 PGM2 PGM3 SIREN
COMMUNIC.DISPLA Y 93 Dial Tone Dialing Wait HS Send Data Wait Kof f A ll Sent
DISPLAY LOG 94
UDL / Direc t UDL 95
RING CA LL BA CK CURRIER RECEIV E TRA NSMIT END
MA NUFA CTURER TEST 96
RELAY DIAL TONE LOW FREQ HIGH FREQ
CLOCK ADJUSTMENT 97
LOG f ile rev iew
Max phone number length 16 symbols, pulse dialing=ON+0, DTMF dialing=ON+1,
pause=ON+2, Dial tone detect=ON+3, clear number=ON+5. Default -> no number.
4 digits. Default -> 1234.
4 digits. Default -> 1234.
One digit (0 to 9). Default -> 7.
Records and Playback voice message into voice dialer
Max phone number length 16 symbols, pulse dialing=ON+0, DTMF dialing=ON+1,
pause=ON+2, Dial tone detect=ON+3, clear number=ON+5. Default -> no number.
DIALER MESSAGES
A number from 00 to 99
From 0 to retries. Default -> 0, meaning 4 retries.
Max phone number length 16 symbols, pulse dialing=ON+0, DTMF dialing=ON+1,
pause=ON+2, Dial tone detect=ON+3, clear number=ON+5. Default -> no number.
4 digits + A, B, C, D. Def ault -> 9999.
Enter the communication protocol number (0-User dialer; 1-Contact ID; 2-SIA). Def ault -> 1.
Max phone number length 16 symbols, pulse dialing=ON+0, DTMF dialing=ON+1,
pause=ON+2, Dial tone detect=ON+3, clear number=ON+5. Default -> no number.
4 digits + A, B, C, D. Default -> 9999.
Enter the communication protocol number (0-User dialer; 1-Contact ID; 2-SIA). Def ault -> 1.
TEST report time (HH:MM). Default -> 00:05.
Max phone number length 16 symbols, pulse dialing=ON+0, DTMF dialing=ON+1,
pause=ON+2, Dial tone detect=ON+3, clear number=ON+5. Default -> no number.
Max phone number length 16 symbols, pulse dialing=ON+0, DTMF dialing=ON+1,
pause=ON+2, Dial tone detect=ON+3, clear number=ON+5. Default -> no number.
Max phone number length 16 symbols, pulse dialing=ON+0, DTMF dialing=ON+1,
pause=ON+2, Dial tone detect=ON+3, clear number=ON+5. Default -> no number.
NO - LED1 to LED6 do not light Y ES - LED1 to LED6 light
TEST autoreporting (DD). Default -> 1.