22 CA60Plus control panel Installation manual
ADDRESS 45 SETTING THE DATE
SET DATE The date and month are set (DD.MM). The indication is hexadecimal and the
digits are displayed one by one. To view the date, the digits can be browsed with
the help of the arrows.
DEFAULT : 01.01
ADDRESS 42 PROGRAMMING BELL TIME
BELL TIME Duration is set for the bell time of the sirens. A double-digit figure between 0
and 99 minutes is entered. For a time interval of less than 10 seconds, the first
digit must be 0.
The indication is hexadecimal and the digits are displayed one by one. To view
the introduced data, the digits can be browsed with the help of the arrows.
DEFAULT : 3 minutes
ADDRESS 41 PROGRAMMING ENTRY TIME
ENTRY TIME Entry time is assigned to Entry/Exit type zones. A double-digit figure between 1
and 99 seconds is entered. For a time interval of less than 10 seconds, the first
digit must be 0.
The indication is hexadecimal and the digits are displayed one by one. To view
the introduced data, the digits can be browsed with the help of the arrows.
DEFAULT : 15 seconds
4. Time periods
ADDRESS 40 PROGRAMMING EXIT TIME
EXIT TIME Exit time is assigned to Entry/Exit type zones. A double-digit figure between 1
and 99 seconds is entered. For an interval of time, less than 10 seconds, the first
digit must be 0.
The indication is hexadecimal and the digits are displayed one by one. To view
the introduced data, the digits can be browsed with the help of the arrows.
DEFAULT : 45 seconds
ADDRESS 44 SETTING THE BUILT-IN CLOCK
SET CLOCK The hours and minutes are set (HH:MM). The indication is hexadecimal and
the digits are displayed one by one. To view the clock, the digits can be browsed
with the help of the arrows.
DEFAULT : 00:00 hours
ADDRESS 43 PROGRAMMING BELL DELAY TIME
BELL DELAY Delay is set for initiating the bell time of the sirens. A double-digit figure between
0 and 99 seconds is entered. For a time interval of less than 10 seconds, the first
digit must be 0.
The indication is hexadecimal and the digits are displayed one by one. To view
the introduced data, the digits can be browsed with the help of the arrows.
DEFAULT : 0 seconds
To Next Page
Loading...
