Installation and Programming Manual - СА62 Alarm Control Panel 45
ADDRESS 6035 - GROUPS OF MESSAGES FOR VOICE DIALER TRANSMISSION
VD60 group
messages
Programming the groups of message to be transmitted by the voice dialer at this address. The possible
options are 0 and 1. The status of the parameter is changed with pressing a random digit number.
At SUPPLEMENT E - Examples for voice messages, are shown an examples for voice messages for
zones and events.
0 (Zone) Transmitting messages by zones.
Indication
LED
LCD
1 2 3 4 5 6
1 (Events) Transmitting messages by events.
Indication
LED
LCD
(1) (2) (3) (4) (5) (6)
Default settings - 1 (Events)
ADDRESS 6036 - TRANSMITTING MESSAGES FROM THE VOICE DIALER
Transmitting
messages
from VD60
Stopping the voice messages transmitting is set on this address. It is possible the user stop the trans-
mitting with entering a valid user code.
Every click of a digital button alternatively changes the parameter status. The display indication is
shown in the tables.
NO
The message transmitting can be stopped with
entering of valid user code.
Indication
LED
LCD
1 2 3 4 5 6
YES
The message transmitting cannot be stopped - the
dialer will sent all necessary voice messages by
zones/events.
Indication
LED
LCD
(1) (2) (3) (4) (5) (6)
Default settings - NO
To Next Page
Loading...
