Televic D-CERNO - Page 45

D-Cerno Wired System
Installation and User Manual
Televic Conference Systems
V0.4 - December 6, 2012
45
Figure 13.5: TCP/IP properties
Assigning a Static IP Address with
MACINTOSCH OSX
 Go to the Apple Menu and select System
Preferences
 Click on Network
 Select Built-in Ethernet in the Show pull-down
menu
 Select Manually in the Configure pull-down
menu
 Input the Static IP Address and the Subnet Mask
Address in the appropriate fields. The IP
Addresses on the network must be within the
same range. The default IP address from the
central unit is 192.168.0.20 so the computer
should have an IP Address that is sequential, like
192.168.0.11 and 192.168.0.24. The subnet
mask must be the same for all equipment on the
network: 255.255.255.0.
 Click Apply Now
Note:
If you have a proxy server or firewall
installed on your computer check the
connection restrictions to the D-Cerno
unit IP address and content that uses
java scripts.
Please refer to the documentation that
came with your installation for the
correct settings.
Reference:
Please refer to the documentation that
came with your PC or MAC installation
for additional information and the
correct settings.