PRESETS FROM COCON AUDIO APPLICATION
You can use the CoCon Audio application to create additional audio routing configurations. After creation
these are sent to and saved on the Plixus engine. These are then accessible from the web server, even
when CoCon is not running. In contrast to the predefined configurations you can still edit these
configurations.
Auxiliary Levels
Auxiliary input levels and output levels are by default referenced on 0dB. This means there is no
amplification or gain reduction. You can adjust the levels manually by using the scroll bar.
Additional Options
When a predefined audio configuration is selected and you use the web server for the interpreter
configuration, there two additional functions are available.
You can assign an outgoing language channel to Aux 2 and 3. In the drop-down box select the
desired outgoing channel. This is only possible when the languages are configured in the web
server.
All language channels that you configure in the web server can be automatically routed to
Dante when you select the checkbox Automatically route interpretation channels to
Dante.
This means the following for the Dante channels: The floor is always routed to channel
number1. From then on, with the option activated, the other x language channels follow on
channel 2 until x+1
AUDIO R O UTING 13 0
To Next Page
Loading...
