Televic Plixus AE-R - Cabling of Nameplate; Connect to Plixus Conference Ports

CABLING OF NAMEPLATE
Figure 1-48 The bottom side of the Plixus showing all available ports
You can use the Plixus in your Plixus network. There are two options to connect to the nameplate to your
system. You can use the Plixus conference ports (1) or use the USB connection (2).
Connect To Plixus Conference Ports
To daisy-chain the nameplate in a branch connected directly to the engine or a network extender plug in
the CAT 5e cable into the conference port.
PORTABLE USAGE
Guide the cables through the openings on the side of the nameplate base when you want to easily chnage
the location of the nameplate. To see how to attach the side panels see "Mount the Nameplate" on
page96.
Figure 1-49 Bottom view of CAT 5e cabling of nameplate for portable usage
Figure 1-50 Top view of cabling of nameplate for portable usage
CABLING O F NAMEPL ATE 93