INSTALL CABLES
Use CAT 5e cables to connect Plixus AE-R or MME to the delegate and chairmen units, and to connect the
different units in a branch / loop. For more information on cable details, see "Cable requirements" on
page63.
Televic has standard pre-made cables available in different lengths:
ICC5/2 2 m
ICC5/5 5 m
ICC5/10 10 m
ICC5/20 20 m
The voltage level at the output of the central unit is 48 V. A voltage drop is caused by the length of the cable
and the number of units. The last unit of the branch should receive at least 36 V.
INSTAL L CAB L ES 77
To Next Page
Loading...
