PLIXUS POWER SUPPLY
The Plixus MME has an internal power supply of 48V/10A(480W). However the Plixus AE-R does not. By
default you receive one Plixus power supply with the AE-R. When the internal power supply of the MME or
the external power supply of the AE-R is insufficient, a separate power supply is necessary.
For more information on how many power supplies your system requires see "Power supply design" on
page61.
Plixus AE-R Power Supply
In contrast to the MME the Plixus AE-R doesn't have an internal power supply. By default the Plixus AE-R
comes with one external power supply.
Plixus Power Supply
The power supply is a 19" rack mount version. The front panel is equipped with a rocker mains switch with
built-in indicator and two mains fuses.
The use of an additional power supply is needed when the internal power supply of the Plixus MME/AE-R is
insufficient.
The 230 V mains is connected to the power supply through a male connector (1) at the back of the power
supply. A power good TTL output on a D9 connector (2) allows you to check whether the power is okay. Six
female Phoenix connectors (3) are available to branch off the 48 V.
Figure 1-10 Rear power supply connections
PLIX US POWER SUPPL Y 32
To Next Page
Loading...
