Telit Wireless Solutions LE910C1-AP Hw Design Guide

LE910Cx mPCIe Hardware Design Guide
1VV0301510 Rev. 13 Page 59 of 73 2021-07-07
Not Subject to NDA
10. EMC RECOMMENDATIONS
All LE910Cx-mPCIe signals are equipped with some EMC protection. However, the
accepted level differs according to the specific pin.
EMC Recommendations:
Pad
Signal
I/O
Function
Contact
Air
All pins
All pins
All functions
± 4 KV
± 8 KV
Antennas
Antenna connectors
Analog I/O
Antenna connectors
± 4 KV
± 4 KV
Table 25: EMC Recommendations
Appropriate series resistors must be considered to protect the input lines from
overvoltage.

Telit Wireless Solutions LE910C1-AP Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C1-AP
Category	Control Unit
Language	English