Telit Wireless Solutions LE910C1-AP Hw Design Guide

LE910Cx mPCIe Hardware Design Guide
1VV0301510 Rev. 13 Page 72 of 73 2021-07-07
Not Subject to NDA
16. DOCUMENT HISTORY
Revision
Date
Changes
13
2021-07-07 Applicability Table and Section 2.2 - Update product variants(SVX and
SAX )
Minor changes on the language and layout
Legal Notices updated
12
2021-01-27
Modified table errors and typos
Section 3.2 – Added pin-out section; full compatibility with mPCIe spec.
Modified figure sections 4.3.1.1. and 4.3.1.2
Section 8.1 – Updated Mechanical Drawing
11
2020-10-12 Section 2.7.2 – Updated Weight
10
2020-07-06 APPLICABILITY TABLE - -EUX added
Section 2.5 – TX Output Power – Updated
Section 2.6 – RX Sensitivity- Updated and Note added
7.3.3 Antenna Diversity Requirements – Note Added
7.3.4 GNSS Antenna Requirements – Note added
9
2020-07-01 Section 3.1 – Updated Pin-out
8
2019-08-13 Section 3.1 – added ‘WARNING’ two types of mPCIe modules; V1 and V2
7
2019-06-17
Section 2.2 – Updated product Variants
Section 2.7.1 – Updated Dimensions
Section 11.3 – Updated moisture sensitivity from level 3 to level 1
6
2018-12-04
Add Variants – LE910C1-NF, LE910C4-EU, LE910C1-SA, LE910C1-ST,
LE910C1-SV, LE910C1-LA
5
2018-11-21 Section 4.3.1.3 – Deleted Battery Source Power Supply Design Guide
4
2018-06-20
Section 1.5 – Updated reference documents
Section 2.2 – Updated product Variants and Frequency Bands
Section 4.1 & 5.2 – Updated operating voltage settings
3
2018-06-11
Section 2.2 – Updated product Variants and Frequency Bands
Section 3.1 – Updated pinout table
Section 4.3.2 – Updated thermal design guidelines
Section 14 - Updated frequency table
2
2018-02-28 Updated weight and added note related to Power Down / Off
1
2018-01-11 First issue
From Mod.0818 rev.4

Telit Wireless Solutions LE910C1-AP Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C1-AP
Category	Control Unit
Language	English