Telit Wireless Solutions LE910C1-AP Hw Design Guide

LE910Cx mPCIe Hardware Design Guide
1VV0301510 Rev. 13 Page 8 of 73 2021-07-07
Not Subject to NDA
Symbol Conventions
Danger:
This information MUST be followed or catastrophic
equipment failure or personal injury may occur.
Warning:
Alerts the user on
important steps about the module
integration.
Note/Tip:
Provides advice and suggestions that may be useful when
integrating the module.
Electro-static Discharge:
Notifies the user to take proper grounding
precautions before handling the product.
Table 1: Symbol Conventions
All dates are in ISO 8601 format, that is YYYY-MM-DD.
Related Documents
• LE910Cx Hardware User Guide, 1VV0301298
• LE920x4/LE910Cx AT Command User Guide, 80490ST10778A
• Telit EVB User Guide, 1VV0301249
• mPCIe IFBD HW USER GUIDE, 1VV0301483
• LE910/LE920 Digital Voice Interface Application Note, 80000NT11246A
• Event Monitor Application Note, 80000NT10028a
• PCI Express Mini Card Electromechanical Specification, Revision 2.1

Telit Wireless Solutions LE910C1-AP Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C1-AP
Category	Control Unit
Language	English