Tempo Communications Sidekick Plus - Page 21

21
Sidekick
®
Plus Test Set
3-Lead
To check the DC voltage on 3-lead, press the
F33-Lead key. DC voltage is displayed from the tip-
to-ring, tip-to-ground, and ring-to-ground in sequence,
with the active measurement in bold.
Press the F3 3-Lead key to return the screen to the
single pair DC menu. Press the F4 AC key to switch the
display to AC voltage.
DC meter specifications are as follows:
• Range: 0 to 300 volts
• Resolution:
0 to 9.99 V = 0.01 V
10 to 300 V = 0.1 V
• Accuracy: ±3%