18
3.2.2 Right click “Wireless Network Connection” and select
“Properties” then configure the IP address as 3.1.3 and 3.1.4.
3.2.3 Right click “Wireless Network Connection” and select
“View Available Wireless Network”. The entire wireless signal will
be shown in the interface. Please select “Tenda”. If you don’t find
it, please click “Refresh Network List”.
3.2.4 Select “Tenda” and click “Connect” or double-click “Tenda”
to enter into the Router’s interface.
3.3 Login to the Web Interface
After you set you computer as 3.1 and 3.2, you can follow the
below steps to access the Router’s web interface.
To Next Page
Loading...
Need help?
General
