Tenda Portable 3G Wireless Router - WDS Settings

150Mbps Portable 3G Wireless Router User Guide
respond to the WPS client’s connection requests.
6.5 WDS Settings
Wireless AP signal coverage has range limits. WDS is
mainly used to repeat wireless signal, and enlarge its
coverage. Please keep SSID, channel and encryption type of
all AP respectively consistent.
This router supports three WDS modes: Lazy, Bridge,
Repeater.
 Lazy: In this mode, the connected router must be in
Bridge or Repeater mode and the MAC address of your
router must be entered.
 Bridge: In this mode, the connected router must be in
Lazy or Repeater mode. Manually add the MAC address
of the connected router to AP MAC address list or scan
to select.
 Repeater: In this mode, the connected router can be
in Lazy, Bridge mode or single client. Manually add the
MAC address of the connected router to AP MAC address
list or scan to select.
54