22
11b/g/n mode Allow 11b/g/n-compliant client device to
connect with the AP with auto-negotiation speed.
¾ SSID：SSID (Service Set Identifier) is the unique name of
the wireless network.
¾ Channel：Specify the effective channel (from 1 to 13\Auto)
of the wireless network
¾ Broadcast (SSID): Select “Enable” to enable the device's
SSID to be visible by wireless clients. The default is
enabled.
¾ BSSID：Basic Service Set Identifier of wireless network. In
IEEE802.11, BSSID is the MAC address of wireless access
point.
¾ Extend Channel：To increase data throughput of wireless
network, the extension channel range is used in 11n mode.
¾ Channel Bandwidth： Select the channel bandwidth to
improve the wireless performance. When the network has
11b/g and 11n clients, you can select the 40M; when it is an
11n network, select 20/40M to improve its throughput.
To Next Page
Loading...
Need help?
General
