27
4.4 Wireless Router Mode
In the wireless router mode, you can use this device as the router
directly connected to DSL modem, CABLE modem such
broadband devices or home broadband cable directly
First, login to the interface as chapter 3 described.
4.4.1 Select the “Setup Wizard” in the left column and then click
“Next”.
4.4.2 Configure the “Aceess Methods”
a. Dynimic IP(DHCP)
The default access method is DHCP. If your ISP provides you the
Dynamic IP, you can choose DHCP access way. Every time you
access the internet, you will get different IP. Select “Dynamic IP”
and click “Next”. For following steps, please refer to 4.1.4 to
4.1.6.
To Next Page
Loading...
Need help?
General
