49
the maximum transmission packet size in bytes. The packet
will be fragmented if the arrival is bigger than the threshold
setting. The default size is 2346 bytes. It is recommended
not to modify this value.
¾ RTS Threshold: RTS stands for “Request to Send”. This
parameter controls what size data packet the frequency
protocol issues to RTS packet. The default value of the
attribute is 2346. It is recommended not to modify this value
in SOHO environment.
¾ TX Power: Set the output power of wireless radio. The
default value is 100.
¾ WMM Capable: It will enhance the data transfer
performance of multimedia data when they’re being
transferred over wireless network. It is recommended to
enable this option.
¾ APSD Capable: It is used for auto power-saved service.
The default is disabled.
6.4 WPS Settings
WPS (Wi-Fi Protected Setting) can be easy and quick to establish
the connection between the wireless network clients and the
device through encrypted contents. The users only enter PIN code
or press WPS button on the panel to configure it without selecting
To Next Page
Loading...
Need help?
General
