69
¾ MAC Address Filter: Check to enable MAC address filter.
¾ Access Policy: Select one number from the drop-down
menu.
¾ Enable: Check to enable the access policy.
¾ Filter Mode: Click one radio button to enable or disable to
access the Internet.
¾ Policy Name: Enter a name for the access policy selected.
¾ MAC Address: Enter the MAC address you want to run the
access policy.
¾ Times: Select the time range of client filter.
¾ Days: Select the day(s) to run the access policy.
¾ Apply: Select Apply to enable the settings.
For example:
If you want to configure the host with MAC address
00:22:15:55:2A:15 not to access the Internet at 9：00-18：00,
you need to set it as above.
11.4 Prevent Network Attack
This section is to protect the internal network from exotic attack
such as SYN Flooding attack, Smurf attack, LAND attack, etc.
Once detecting the unknown attack, the Router will restrict its
bandwidth automatically.
The attacker’s IP address can be found from the “System Log”.
To Next Page
Loading...
Need help?
General
