66
¾ Access Policy: Select one number from the drop-down
menu.
¾ Enable: Check to enable the access policy.
¾ Filter Mode: Click one radio button to enable or disable to
access the Internet.
¾ Policy Name: Enter a name for the access policy selected.
¾ IP Start/End: Enter the starting/ending IP address.
¾ Port: Enter the port range based over the protocol for access
policy.
¾ Type: Select one protocol (TCP/UDP/Both) from the
drop-down menu.
¾ Times: Select the time range of client filter.
¾ Days: Select the day(s) to run the access policy.
For example:
If you don’t want the computer at the IP address of 192.168.0.100
to access the Internet from 9：00 to 18：00 everyday without
restrictions to other computers in LAN, you need to set the packet
filtering list as the above diagram.
11.2 URL Filter Settings
In order to control the computer to have access to websites, you
can use URL filtering to allow the computer to have access to
certain websites at fixed time and forbids it having access to
To Next Page
Loading...
Need help?
General
