150Mbps Portable 3G Wireless Router User Guide
server’s IP address is 192.168.0.10, please input it.
Step 6: select the communication protocol used by your
internal host: TCP, UDP, ICMP .
Step 7: click “Apply” to activate the settings.
The following table has listed the well-known application
and service port:
Server Protocol Service Port
WEB Server TCP 80
FTP Server TCP 21
Telnet TCP 23
NetMeeting TCP 1503、1720
MSN
Messenger
TCP/UDP
File Send:6891-
6900(TCP)
Voice:1863、6901(TCP)
Voice:1863、5190(UDP)
PPTP VPN TCP 1723
Iphone5.0 TCP 22555
SMTP TCP 25
POP3 TCP 110
8. Why can’t I use wireless WAN function to
access the Internet?
a. Please make sure that the wireless adapter can access
the Internet when connected to the computer, wireless
signals scanned by the adapter are strong enough, and
quality of signals is good enough. If it can scan too many
wireless signals, we recommend you to use 11b/g mode for
reducing interference.
b. Please make sure that the needed parameters such as
SSID, MAC address etc. are correct. It is recommended to
To Next Page
Loading...
