150Mbps Portable 3G Wireless Router User Guide
destination address which needs for L2TP connection.
User name/Password: Used to validate identity when
connecting to the L2TP server.
Address Mode: Set the router’s IP address mode, you
can select either “Dynamic” or “Static”. If your ISP
doesn’t provide the IP address, please select “Dynamic”.
All the above parameters are provided by ISP.
E. PPTP
For PPTP connection configuration, please refer to the L2TP
connection method.
5.3 MAC Address Clone
This page is for the Router’s WAN MAC address
configuration (Only in Wireless Router mode)
To Next Page
Loading...
