150Mbps Portable 3G Wireless Router User Guide
Wireless-B and Wireless-G devices.
11b/g/n mixed mode: Select it if you have
Wireless-B, Wireless-G and Wireless-N devices.
SSID ： SSID (Service Set Identifier) is the unique
name of the wireless network. Enter this SSID for
wireless devices to have access to the router. You can
either customize a network name or use the default.
Broadcast (SSID): Select “Enable” to enable the
router’ SSID to be scanned by wireless devices. The
default is enabled. If you disable it, the wireless
devices must know the SSID for communication.
BSSID ： Basic Service Set Identifier of wireless
network. In IEEE802.11, BSSID is the MAC address of
wireless access point.
Channel: The channel used by the current router. You
can select other effective channels from the drop-
down list. There are channels 1 to 13 for your options.
When there are many wireless signals around, you can
select a different channel to reduce interference.
Operating mode: works in 11n mode only. Different
wireless standards involve different frame formats in
physical layer. Green Field mode can greatly improve
the wireless transmission efficiency .However, if the
device that is using 802.11n Greenfield mode does not
adopt the same channel with that of 802.11b/g base
station, device in 802.11b/g mode can not
To Next Page
Loading...
