It specifies the Ethernet mode of the PoE LAN port of this AP.
⚫
Faster Speed (Auto Negotiation): This mode features a high transmission rate but
short transmission distance. Generally, this mode is recommended.
⚫
Longer Distance (10 Mbps Full Duplex): This mode features a long transmission
distance but relatively low transmission rate (usually 10 Mbps).
⚫
The Longer Distance (10 Mbps Full Duplex) mode is recommended only when the
Ethernet cable that connects the PoE LAN port of the AP to a peer device exceeds
100 meters. In this case, the connected LAN port of the peer device must work in
auto-negotiation mode. Otherwise, the PoE LAN port of the AP may not be able to
properly transmit or receive data.
⚫
Modifications to Ethernet mode take effect after you reboot the AP or unplug
from and plug into the port again.
To Next Page
Loading...
