Tenda W15-Pro - Page 71

Document version: V1.0
64
Step 6
Click Save.
---End
Parameter description
Parameter
Description
SSID
It specifies the wireless network to which the rule applies.
Access Control
It specifies whether to enable or disable the wireless control function.
This function allows or disallows the wireless devices to access the wireless network of
the AP based on their MAC addresses.
Mode
It specifies the access control mode
⚫
Blacklist: It indicates that only the wireless clients on the wireless access control list
cannot connect to the AP with the selected SSID.
⚫
Whitelist: It indicates that only the wireless clients on the wireless access control list
can connect to the AP with the selected SSID.