Tenda W15-Pro - Page 75

Document version: V1.0
68
Parameter description
Parameter
Description
Identify Client Type
If this function is enabled and the client connected to the AP has accessed an
http://URL, the operating system type of the client can be viewed when you choose
Status > Client List.
Broadcast Packet Filter
If this function is enabled, the AP can reduce air interface resources usage and
ensure the bandwidth for business data transfer.
Filters
Select a mode after you enable the Broadcast Packet Filter function.
⚫
Excludes DHCP and ARP: Filter out all broadcast or multicast data except DHCP
and ARP packets.
⚫
Excludes ARP: Filter out all broadcast or multicast data except ARP packets.