Portable Wireless AP/Router
addresses, please modify one.
4. My computer can not log in equipment; can not access
the internet, and a yellow triangle with exclamation point
symbols shows, how to deal with?
This problem is due to your network card is not
assigned the IP address. If set your computer to
automatically obtain IP, please ensure that the source of the
router's DHCP is turned on. DHCP can automatically
assign an IP address to your computer. If there is no DHCP,
please set a static IP address and fill in gateways and DNS,
otherwise you can not access Internet.
5. I can not use E-mail and access the Internet. What can I
do?
It happens in ADSL connection and Dynamic IP users. And
you need modify the default MTU value (1492). Please in
the “WAN Setting” modify the MTU value with the
recommended value as 1450 or 1400.
6. How can I configure and access the Internet via Dynamic
IP?
In Setup Wizard of the Web utility interface, select
“Dynamic IP” connection type and click “Save” to activate
it. As some ISPs bind the user computer’s MAC address,
To Next Page
Loading...
Need help?
General
