Portable Wireless AP/Router
Internet when connected to the computer, wireless signals
scanned by the adapter are strong enough, and quality of
signals is good enough. If it can scan too many wireless
signals, we recommend you to use 11b/g mode for reducing
interference.
b. Please make sure that the needed parameters such as
SSID, MAC address etc. are correct. It is recommended to
use Auto Scan to finish the settings in the setup process.
c. Please make sure that IP address range obtained at WAN
port are different as the one obtained at LAN port. If they
are at the same range, you can modify the LAN IP address
to solve the problem.
d. Please do not detach any antenna of the wireless
Router when you are using the Router.
After trying all the above steps, if you still can’t access the
Internet, you can contact us for support.
If you still have some problems, please contact our
customer service or log on our website.
Tenda website :http://www.tenda.cn
Technical Support
To Next Page
Loading...
Need help?
General
