Portable Wireless AP/Router
amplified and stable signal. This mode also can be used in
broadband satellite receiver access.
The third mode is WDS+AP mode. In this mode, you can
bridge two local area networks or two computers and
meanwhile amplify and transfer the signals. This mode is
used for many devices wireless bridge and repeat.
The forth mode is WISP Router mode. In this mode, you
do not need to configure the signal transmitter but only to
simply configure the W150M to amplify the wireless signal
and multi computers can share the internet. This mode is
mainly used in hotspot access.
The fifth mode is Wireless Router mode. Use this mode
to form a local network that has both broadband
connections via broadband access cable and wireless access.
This mode can apply to various broadband access
environments, including ADSL, Cable TV Networks.
Having wireless AP and wireless Router function,
W150M is equipped with a "Mode" button to switch the
modes to achieve different wireless access. In addition, the
device can be powered by an alternative power supply
through the USB port to establish wireless networks freely.
To Next Page
Loading...
