TM SERIES
-XIV
472797 - 1/15 Terex South Dakota, Inc. TM Series
SAFETY RELATED DECALS
SAFETY RELATED DECALS
Safety signs are designed and fitted to the product to warn of possible dangers, and MUST be replaced
immediately if they become unreadable or lost. If the product is repaired and parts have been replaced on
which safety signs were fixed, be sure new safety signs are fitted before the product is put into service. Use
mild soap and water to clean safety signs - DO NOT use solvent based cleaners, as they may damage the
safety sign material.
NOTE: *Use decal 419265 and 465703 when Aerial Device is not certified in accordance with
latest ANSI A92.2 revision or booms are not insulated.
Operating this equipment without all safety and control decals in place can be
hazardous.
ITEM # DECALS QTY PART #
1. CAUTION - TRUCK LEVEL 2 79584
2. BULLSEYE LEVEL 2 90489
3. ARROWS 18’ H21503
4. NOT INSULATED BEYOND ARROWS 10 402236
5. READ CAREFULLY 1 414590
6. FAILURE TO OBEY 1 419262
7. ELECTROCUTION HAZARD 2 419263
8. FALLING FROM PLATFORM 2 419264
9. * ELECTROCUTION HAZARD - NOT INSULATED 2 419265
10. ELECTROCUTION HAZARD - KEEP CLEAR 3 419266
11. UNTRAINED OPERATOR 2 419267
12. OUTRIGGER - CRUSHING - DO NOT OPERATE 2 419268
13. OUTRIGGER - CRUSHING - STAND CLEAR 4 419269
14. CONDUCTIVE HOSE 2 419270
15. CONTROLS NOT INSULATED 1 463602
16. * NOT INSULATED 4 465703
17. ANSI WARNING 1 468476
18. OVERTURNING HAZARD 2 475373
OVERTURNING HAZARD (TM125 ONLY) 2 488127
19. MAINTENANCE RECORD 1 489119
20. LANYARD ATTACHMENT, X2 (depending on boom tip option) 1 495440
21. LANYARD ATTACHMENT, X1 (depending on boom tip option) 1 495441
22. TRUCK COMPUTER 1 495845
23. FALL HAZARD - MAINTENANCE 1 495892
24. PINCH POINT 4 H23451
25. ESCAPING FLUID UNDER PRESSURE 1 H23877
5,7,8,9,11,14,
15,18,20,21
1,2,10,12
13
10
13
3,4
24
16
6,7,9,11,17,
19,23,25
22
Inside
Cab
To Next Page
Loading...
Need help?
General
