TESTO 310 - Page 22

5 Using the product
22
3. Make settings:
Use [esc] to revert to the previous parameter at any
time.
Display /
parameter
Explanation
ArEA (area
version)
Selecting the area version activates different
calculation formulas and associated
measurement parameters, see Area versions,
page 17.
> Select area version code: [▲] and [▼].
> Switch to the next parameter: [OK].
Unit of
pressure
> Select the unit: [▲] and [▼].
> Switch to the next parameter: [OK].
Unit of
temperature
> Select the unit: [▲] and [▼].
> Switch to the next parameter: [OK].
Setting the
time
> Set values: [▲] and [▼].
> Switch selection between hour, minute
(tens) and minute (single units): [].
> Switch to the next parameter: [OK].
Setting the
date
> Set values: [▲] and [▼].
> Switch selection between year (tens), year
(single units), month, day (tens) and day
(single units): [].
> Exit the configuration menu: [OK].