TESTO 480 - Saving Measurement Values

6 Using the product
51
During the measurement, the values are calculated from
the current readings.
After the measurement, a calculation is carried out based
on mean values.
8. [ ] → Save and close
- Measurement protocol is saved under the selected measuring
point.
9. The measurement protocol is displayed.
10. [ ] → Graphic.
6.6.2. Saving measurement values
All measurement protocols displayed in Explorer are saved in the
internal instrument memory.
Saving measurement values on an SD card
1. Insert SD card into the SD card slot (right-hand side of
instrument).
Only SD cards with max. 2 GB space can be used.
2. Select root folder in the Explorer view.
3. [ ] → Export.
- An export message is displayed.
Importing measurement values from an SD card
When importing data from an SD card, all data in the
internal instrument memory is overwritten.
1. Insert SD card into the SD card slot (right-hand side of
instrument).
Only SD cards with max. 2 GB space can be used.
2. Select root folder in the Explorer view.
3. [ ] → Import.
- A list of importable data is displayed.
4. Select the required entry.
- An import message is displayed.