TESTO 480 - Favourites Tab; Probe Menu

6 Using the product
25
- For the measurement parameter, press [ ] to call up all
measured and calculated measurement parameters which
the selected probe can provide. Select the required
measurement parameter [ ] and confirm with [ ].
- For the unit, press [ ] to call up all available units for the
measurement parameter. Select the unit required [ ] and
confirm with [ ].
8. Save changes: [ ] → Save and close.
9. Exit the Parameter display sub-menu: [ ] → Save and
close.
10. Quit Display menu: [ESC] → [ESC]
From firmware 1.11 onwards, newly inserted lines are automatically
copied to the Favourites tab.
6.3. Favourites tab
The Favourites tab is the actual work area for the instrument.
Here, measurement values of various probes can be combined into
one measurement, and measuring programs can be run, saved and
printed.
Only the measurement values displayed on the Favourites tab are
saved in the measurement protocol.
When the probe is first connected, all measurable parameters are
transferred over to the Favourites tab. Calculated measurement
parameters must be added manually on the Favourites tab.
Adjusting the displayed measurement parameters
> [ ] → Display → Parameter display → [ ]
6.4. Probe menu
Call up function:
> [ ] → Probe menu.
Adjustable parameters
Symbol
Explanation
Damping (moving
average)
Damping type and duration can be
individually adjusted.
Damping can be activated/deactivated.