Texas Instruments DLP - User Interface: Splash Patterns

User Interface Overview www.ti.com
16
DLPU074A–August 2018–Revised October 2019
Submit Documentation Feedback
Copyright © 2018–2019, Texas Instruments Incorporated
DLP
®
Display and Light Control EVM GUI Tool
• Read pattern ready configuration (0x95)
4.3.3 Splash Patterns Page
Figure 12. Space-Coded Patterns Page
Splash Patterns display images stored in flash memory. On the Space-Coded Patterns page, users define
these pattern configurations:
• splash image index
• illumination selection
• bit depth
• patterns per frame
• exposure time
• pre-exposure dark time
• post-exposure dark time
On the Space-Coded Patterns page, users define these trigger out settings:
• enable
• invert
• delay for both triggers
The following commands are used on this page:
• Write trigger out configuration (0x92)
• Write pattern configuration (0x96)
• Write operating mode select (0x05)
• Write splash screen select (0x0D)