Texas Instruments DLP - User Interface: Advanced Tool - Commands; Command Pages

www.ti.com User Interface Overview
29
DLPU074A–August 2018–Revised October 2019
Submit Documentation Feedback
Copyright © 2018–2019, Texas Instruments Incorporated
DLP
®
Display and Light Control EVM GUI Tool
4.6.3 Command Pages
Figure 25. Command Pages
On the Command Pages, users can issue the command Set or Get from the GUI. Click on the command
group (for example Display, Source or Test Pattern) on the left to display the list of commands available
for that group. Users can set the parameters of the individual commands or get the parameters for the
command. Click Get All or Set All at the top-right corner to send all the commands for the group selected.