www.ti.com
User Interface Overview
21
DLPU074A–August 2018–Revised October 2019
Submit Documentation Feedback
Copyright © 2018–2019, Texas Instruments Incorporated
DLP
®
Display and Light Control EVM GUI Tool
4.4.3.3 Update Flash Image White Point Page
Figure 17. Update Flash Image - White Point Page
On the white point page, the user can overwrite the Red, Green, or Blue Duty Cycle values. The user can
also opt to not change the values. Click Next on the bottom-right corner or Step 3 - Splash Image on the
left to continue. The user can also click the Back button at bottom-left of the section to go back to the
Step 1 - Flash Image page or any of the options (Step 1, 2, 3, or 4) on the left to move to other pages.
To Next Page
Loading...
