Texas Instruments DLP - User Interface: Flash Image Startup Options

www.ti.com User Interface Overview
23
DLPU074A–August 2018–Revised October 2019
Submit Documentation Feedback
Copyright © 2018–2019, Texas Instruments Incorporated
DLP
®
Display and Light Control EVM GUI Tool
4.4.3.5 Update Flash Image Startup Option Page
Figure 19. Update Flash Image - Startup Option Page
on the option page for Update Flash Image, users can overwrite these startup options:
• long or short-axis flip
• startup image file
• startup Red, Green, or Blue LED current
Click Finish on the bottom-right corner to build the flash image. The user can also click the Back button at
the bottom-left of the section to go back to the Step 3 - Splash Image page or any of the oprtions (Step 1,
2, 3, or 4) on the left to move to other pages.