Texas Instruments DLP - User Interface: Flash Image Configuration

User Interface Overview www.ti.com
20
DLPU074A–August 2018–Revised October 2019
Submit Documentation Feedback
Copyright © 2018–2019, Texas Instruments Incorporated
DLP
®
Display and Light Control EVM GUI Tool
4.4.3.2 Update Flash Image Flash Image Page
Figure 16. Update Flash Image - Flash Image Page
The flash image page for Update Flash Image allows the user select these options:
• EVM Type
• input flash image file
• output flash image file
Click Next on the bottom-right corner or Step 2 - White Point on the left to continue. Click the Back
button at the bottom-left of the section to go back to the start page or any of the options (Step 1, 2, 3, or 4)
on the left to move to other pages.