Texas Instruments DLP - User Interface: IntelliBright; IntelliBright Page

www.ti.com User Interface Overview
7
DLPU074A–August 2018–Revised October 2019
Submit Documentation Feedback
Copyright © 2018–2019, Texas Instruments Incorporated
DLP
®
Display and Light Control EVM GUI Tool
• Write Input Image Size (0x2E)
• Write Image Crop (0x10)
• Write Display Size (0x12)
• Write Splash Screen Select (0x0D)
• Write Operating Mode Select (0x05)
• Write Splash Screen Execute (0x35)
4.2.2 Video and Color Page
Figure 5. Video and Color Page
The Video and Color page has two sections:
• Video information
• Color temperature
When the EVM is displaying video, click Get on the Video Information section lets user sees the input
size, cropping size, display size, and frame rate. Click Switch to External Video to toggle (return) the
EVM to video mode (HDMI).
To set the desired look, select cool, medium, warm, or user defined, and then click Set. Click Get to see
the current color temperature setting, To modify the user defined look, refer to Section 4.2.4 to set the
LED Current settings.
The following commands are used in the Video Information section:
• Write input image size (0x2E)
• Write display size (0x12)
• Write image crop (0x10)
• Write operating mode select (0x05)