www.ti.com
Additional Resources
4.4 MSP430Ware and TI Resource Explorer
MSP430Ware is a complete collection of libraries and tools. It includes a driver library (driverlib) and the
graphics library (grlib) used in the software demo. By default, MSP430Ware is included in a CCS
installation. IAR users must download it separately.
MSP430Ware includes the TI Resource Explorer, for easily browsing tools. For example, all the software
examples are shown in the tree below.
Figure 22. MSP-EXP430FR5969 Software Examples in TI Resource Explorer
Inside TI Resource Explorer, these examples and many more can be found, and easily imported into CCS
with one click.
4.5 MSP430FR5969 Code Examples
This is a set of very simple code examples that demonstrate how to use the MSP430's entire set of
peripherals: ADC12, Timer_A, Timer_B, and so on. These do not use driverlib, rather they access the
MSP430 registers directly.
Every MSP430 derivative has a set of these code examples. When writing code that uses a peripheral,
they can often serve as a starting point.
There are also code examples available that use driver library. These code examples are part of the
driverlib download included with MSP430Ware. To access these code examples, navigate into the
driverlib folder or use the TI Resource Explorer to import into CCS.
4.6 MSP430 Application Notes
There are many application notes at www.ti.com/msp430 with practical design examples and topics.
35
SLAU535B–February 2014–Revised July 2015 MSP430FR5969 LaunchPad™ Development Kit (MSP
‑
EXP430FR5969)
Submit Documentation Feedback
Copyright © 2014–2015, Texas Instruments Incorporated
To Next Page
Loading...
Need help?
General
