Texas Instruments TI-80 - Resetting the TI-80

12-4 Memory Management
Resetting the TI
.
80 restores memory to the factory settings, including deleting
the contents of all variables and programs and resetting all system variables to
the original settings. Because you can increase available memory by deleting
individual items, you should rarely need to reset the TI
.
80.
To reset the TI
-
80:
1. Press
2
¯
to display the
MEMORY
menu.
2. Press 3 to select
RESET...
.
3. Make the appropriate menu selection:
¦
To go to the Home screen without resetting memory,
select
NO
.
¦
To reset memory, select
RESET
. The Home screen is
displayed with the message
MEM CLEARED
.
Note: If the screen is blank after
RESET
, adjust the display
contrast. Press
2
and then press and hold
7
(to make the
display darker) or
2 8
(to make the display lighter). You
can press
M
to clear the message on the display.
Resetting the TI-80
Resetting